Skip to content
Christmas 2026: we are closing our installation schedule. Request your quote soon.
Very N'Ice
Ice rink built into a leisure venue, seen from the bar seating area

Custom-shape ice rinks and bespoke projects

We design and build ice rinks in whatever shape the space calls for: round, oval, irregular, over a swimming pool or a pond, or built into a restaurant or leisure venue. Our aluminium freezing system adapts to any outline.

What a special project is

We call a special project any rink that does not fit a standard rectangle: because of its shape, where it is installed or what it has to do. A round rink in a hotel garden, a rink over the water of a pond or a rink that weaves between the columns of a restaurant.

For us, every rink is designed from scratch. We do not work with fixed models that force you to adapt the space to the rink; we do the opposite.

Shapes we can build

Our cooling floor is made of tempered aluminium pipework with the manifolds inside the ice. Because it does not depend on fixed-length rubber mats with manifolds at the ends, it can follow any outline:

  • Round or oval, for squares, gardens or central spaces.
  • Irregular, to fit around columns, walls or changes in level inside a venue.
  • Rinks connected to ice trails, which lead off the rink and wind through the surroundings.
Ring-shaped rink around the Christmas tree in the Plaza Mayor of Medina del Campo (Valladolid, Spain).

If you are looking for a long route, see our ice skating trails, which work on their own or joined to a rink.

Rinks over water and in unusual places

We can install a rink inside a lake, a pond or a swimming pool. To do this we build a structure resting on the bottom, which is removed when the rink is dismantled. It costs extra, but it turns a stretch of water into a winter attraction.

Our system does not let water escape beyond the barriers or damp condense underneath, thanks to the insulating board and double insulation. That is why we also install rinks on roof terraces, above car parks or on upper floors of buildings with units below. On a tennis court no preparation is needed.

Customising the rink

As well as the shape, these elements change how the rink looks:

  • Logos and graphics inside the ice, for brands, shopping centres or sponsors.
  • Lighting inside the ice, which transforms the rink at night.
  • Bespoke barriers: galvanised steel, aluminium, clear polycarbonate that keeps the view open, or our wooden design.
  • Children’s barriers with a double handrail, so children have something to hold on to.
  • Jump ramps, on rinks designed for shows.

All our barrier models are on ice rink accessories.

Ice stages for shows

Some special projects are not public skating rinks but stages. We also build ice stages for shows, circuses and galas: see our ice show floors.

How we run a bespoke project

  1. Your idea. You tell us what you want and send photos, drawings or a sketch of the site.
  2. Technical study. Our engineers and technicians check feasibility: surface, supports, utility connections and where the machinery will go.
  3. Layout and render. We present the layout and a digital view of the whole installation for your approval.
  4. Manufacturing. 12 to 14 weeks from when the design is signed off.
  5. Installation and commissioning. We install, make the ice and train your team.

Very N’Ice does not handle the venue’s decoration or civil works, but we coordinate with whoever does so that everything fits. On ice rink design we explain how we calculate each installation.

Combine your rink with other attractions

A custom-shape rink gains even more with an ice skating trail around it or an ice slide or tubing slide alongside. If you prefer a rectangular rink, see temporary ice rinks or permanent ice rinks.

Send us your idea through the quote form. The more detail you give us about the space, the more specific the proposal will be.

  • Round ice rink surrounded by an illuminated pergola in a garden
    Round ice rink surrounded by an illuminated pergola in a garden
  • Round ice rink under a curved roof, installed beside a lake
    Round ice rink under a curved roof, installed beside a lake
  • Curved ice rink between columns, lit in blue inside a venue
    Curved ice rink between columns, lit in blue inside a venue
  • Ice rink with coloured lighting at the Bowling & Co. leisure centre
    Ice rink with coloured lighting at the Bowling & Co. leisure centre
  • 3D design of an ice rink surrounded by a water feature
    3D design of an ice rink surrounded by a water feature
  • Ice show with dancers, stage set and theatrical lighting
    Ice show with dancers, stage set and theatrical lighting
  • Skaters on a covered ice rink with coloured spotlights
    Skaters on a covered ice rink with coloured spotlights
  • Synchronised skating team performing on the rink
    Synchronised skating team performing on the rink
  • Skaters on an ice rink under an arched canopy at Trentham Gardens (Stoke-on-Trent, UK), with the lake behind
    Skaters on an ice rink under an arched canopy at Trentham Gardens (Stoke-on-Trent, UK), with the lake behind

Frequently asked questions

Can you build a round ice rink?

Yes. Our freezing system does not rely on fixed-length rubber mats, so we can build round, oval or irregular-shaped rinks. We design the cooling floor and barriers for that specific shape, with the same insulation and the same ice quality as a rectangular rink.

Can an ice rink be installed over a swimming pool?

Yes. We build a structure resting on the bottom of the pool or pond and install the rink on top of it. When the rink is dismantled, we remove the structure as well. It costs more than a rink on solid ground. On a tennis court, by contrast, no special preparation is needed.

How much does a custom-shape ice rink cost?

There is no catalogue price, because each project is calculated from scratch: shape, surface, location, type of barrier and extras such as logos or lighting. As a starting point, look at the prices of rectangular rinks of a similar size and send us a sketch for a specific quote.

Can you put my brand's logo inside the ice?

Yes. We embed logos and graphics beneath the ice surface, and lighting systems inside the ice as well. It is a common way to customise rinks in shopping centres, brand events and leisure venues. Send us the design when you request a quote.

How long does a bespoke project take?

First we agree the design with a layout and a render. From there, manufacturing usually takes 12 to 14 weeks. Installation depends on the complexity: a semi-permanent rink takes 5 to 7 days, while a project over water or with its own structure takes longer.

Have a project in mind?

Tell us the location, dates and size. We reply with a concrete proposal within 24 working hours.

WhatsAppQuote