Skip to content
Christmas 2026: we are closing our installation schedule. Request your quote soon.
Very N'Ice
WM Mammoth resurfacer leaving the ice smooth on a professional rink

Ice rink maintenance: caring for the ice and the machinery

Maintaining an ice rink means removing the snow that skates throw up and laying a very thin film of hot water that erases the marks. On small rinks two people do it by hand in about 15 minutes; larger rinks use an ice resurfacer.

Written by Very N'Ice technical team · Updated October 2026

Why the ice needs maintenance

As people skate, the blades scrape the ice and produce snow. Each layer is tiny, but they build up into centimetres that slow skaters down and leave the surface looking scratched and untidy.

Whether it is done by hand or by machine, maintenance always has the same goal: remove that snow and cover the scratches with a very thin film of water above 50 °C, so the surface is smooth and even. Because so little water is used, the ice does not get thicker and the chiller does not have to work harder than necessary.

Which method to use for each rink size

Rink surface Recommended method
Under 300 to 400 m² manual maintenance with shovels and a thin flood
300 to 800 m² small, highly manoeuvrable resurfacer
600 to 1,500 m² medium resurfacer that collects the snow in one pass
Over 1,500 m² large resurfacer for professional and hockey rinks

A hockey rink of IIHF size (30 x 60 m, 1,800 m²) falls in the last group. Resurfacers are usually electric, battery-powered machines, so they can be used indoors. Diesel models are kept for outdoor rinks.

Manual maintenance step by step

On small rinks, two trained people get the ice ready in about 15 minutes:

  1. They gather the snow with special shovels, heavy and with a sharp edge.
  2. They move the snow off the rink surface.
  3. They lay a very thin film of water to cover the scratches without thickening the ice.

For the rinks of this size that we install, we supply everything needed for manual maintenance and show the staff how to do it.

Take care with the edges

The edges along the barriers are the most delicate part. If they are cleaned badly, a step forms between the ice and the barriers that looks poor and gets in the way of skaters. For medium and large rinks there are edgers such as the WM Snip, a 24 V, 2.0 kW electric machine with an electromagnetic brake that stops the cutter as soon as the control is released.

WM technics ice resurfacers

Very N’Ice is the exclusive official dealer and service partner of WM technics for Spain, Portugal and Latin America. On WM ice resurfacers you will find each model with its photo, the surface it is designed for and its product sheet.

We help you choose the machine according to the size of your rink and how it will be used. You can see the rest of the equipment under machinery and accessories.

Maintaining the refrigeration machinery

The rink itself needs nothing more than keeping the ice in good condition. The machinery needs a little more attention:

  • Every 6 months, a chiller service: oil and refrigerant levels.
  • Every 3 to 5 years, an inspection of the hydraulic connections to rule out leaks, a check on ice quality and adjustment of the pipework. In some cases it is worth defrosting the rink and rebuilding the ice.
  • At all times, chiller and pump switched on, including at night. The chiller regulates its own compressors.

Every rink comes with the technical data and manuals for the machinery. If you prefer, we send a technician to carry out the services.

How long a well-maintained rink lasts

With scheduled maintenance, a semi-permanent rink lasts around 15 years, and a fixed rink with the pipework set in concrete can last considerably longer. The rink has a 2-year warranty and the machinery 1 year, provided the scheduled services have been carried out.

If you have more questions about day-to-day operation, see the FAQ or find out how our freezing system is built.

  • Staff member shovelling snow off the ice at the Norcenter shopping centre rink, Buenos Aires
    Staff member shovelling snow off the ice at the Norcenter shopping centre rink, Buenos Aires
  • Two WM resurfacers working at the same time on a hockey arena rink
    Two WM resurfacers working at the same time on a hockey arena rink
  • Operator flooding the ice with a hose to renew the surface of an indoor rink
    Operator flooding the ice with a hose to renew the surface of an indoor rink

Frequently asked questions

Do I need an ice resurfacer for a small ice rink?

No. On rinks under 300 to 400 m² the ice is maintained by hand: two people with special shovels remove the snow and lay a very thin film of water in about 15 minutes. For our installations of that size we include the tools to do it. Above that size, a resurfacer suited to the surface is worthwhile.

Can the machinery be switched off at night to save energy?

No. The chiller and the pump must stay on at all times. The chiller runs automatically, like a fridge: its computer switches one or two compressors on according to what the ice needs, and in winter it may stop on its own. The hydraulic pump keeps running at all times.

What maintenance does ice rink machinery need?

The chiller needs a service every 6 months to check oil and refrigerant levels. Every 3 to 5 years it is advisable to inspect the hydraulic connections and the quality of the ice and, if necessary, rebuild the ice. We hand over the technical manuals and can send a technician.

Who trains the staff who maintain the rink?

We do. We train your team in daily operation, ice maintenance and routine checks. You do not need a specialist technician on staff: if something breaks down, our technical support service is available 24 hours a day, every day of the year.

Have a project in mind?

Tell us the location, dates and size. We reply with a concrete proposal within 24 working hours.

WhatsAppQuote